Give Your Amplifier Extra Power For The Audio Speakers

In this article let us learn How to Bridge Two Car Audio Amps in six easy steps and the advantages of bridging two car amplifiers with tips and warning for doing this job perfectly. Let us learn to get it right the first time itself because wrong connection may blow out the speakers or even burn the amps or sometimes in the worst case both may happen.

With the help of this discussion things can be made for aspirants who want to connect it by themselves. The things that are required for bridging amps are a set of pliers, wire strippers, wrenches, wires that are capable of handling the power of the amps along with good quality amplifiers.

Utmost care must be taken before buying the amplifiers. The manuals must be thoroughly read and must be made sure that both the amplifiers that are purchased can be bridged. If they can be bridged the amplifiers can be bought. If it is not sure then it is advised not to buy those.

Then the supply of power is cut from the two amplifiers. This is done by removing the cable from the positive end of the battery of the car with the help of pliers or wrench. It can remain in such a way till the amplifiers are completely bridged.

While buying an amplifier please do check for the presence of the bridge switch. In most amplifiers it is present at the back edge of the amplifier which can be easily spotted. If it is not in bridge mode set it back to that mode. In the next step inch insulation is stripped off from the wire at both ends.

Every amp has a positive terminal and a negative terminal . For easy identification red color terminals are positive and black are for negative terminals. Next step is to make a connection between positive terminal of one of the amps with one end of the wire. The other end of the wire is attached to negative terminal of another amp. Make the connections tight by screwing the knobs. This process is called bridging of amps.

The other terminals that are free are connected to the speakers. The positive end of one of the two amplifiers is connected to positive end of the speaker. Similarly, the negative end of the amp is connected with the negative end of the speaker.

With this article the question of how to bridge two car audio amps becomes easy. Though the instructions are enough to carry out the bridging it is very important to keep in mind that if there is any uncertainty the bridging must not be done. Since this might lead to damage in the speakers and also the amplifiers.

Learn more about Autozubehoer. Stop by Author Name’s site where you can find out all about Car stereo and what it can do for you.